In the Greater Toronto Area, professional flooring installation typically costs $2 to $9 per square foot installed, depending on the flooring type. Laminate is the most affordable at $2-$4/sqft, followed by luxury vinyl plank at $3-$6/sqft, engineered hardwood at $4-$8/sqft, and solid hardwood at $5-$9/sqft. All of these ranges include professional installation, basic subfloor prep, and cleanup. Here’s the full breakdown.
Price Ranges by Flooring Type
These are current 2026 prices for the GTA market. The ranges reflect genuine variation in material grade within each category — not padding. Budget laminate and premium laminate are both laminate, but they perform very differently over time.
| Flooring Type | Price Range (installed) | Best For |
|---|---|---|
| Laminate | $2–$4/sqft | Above-grade bedrooms, budget renovations |
| Luxury Vinyl Plank (LVP) | $3–$6/sqft | Basements, kitchens, whole-home projects |
| Engineered Hardwood | $4–$8/sqft | Condos, radiant heat, concrete subfloors |
| Solid Hardwood | $5–$9/sqft | Houses with plywood subfloors, long-term investment |
For choosing between these types, see our hardwood vs. engineered hardwood comparison and our individual service pages for LVP, laminate, and solid hardwood.
What Affects Your Final Price
The per-sqft ranges above are starting points. Here’s what pushes a project toward the bottom or top of the range — and what can add costs outside those ranges.
Room Size and Layout
Open-concept layouts are more efficient to install than rooms with many doorways, closets, angles, and transitions. A wide-open main floor of 800 sqft installs faster per square foot than eight separate rooms totaling 800 sqft. Open layouts also typically require fewer transition strips and less waste from cuts. This is one reason whole-home projects often come in at a lower per-sqft price than small single-room jobs.
Subfloor Condition
This is the single biggest wildcard in any flooring estimate. A level, dry, structurally sound subfloor adds nothing to your cost. A subfloor with squeaks, soft spots, unevenness, or moisture damage requires repair before installation. Subfloor leveling and repair typically adds $1-$3/sqft to the project cost, depending on what's needed. We inspect every subfloor during our in-home estimate and include any needed prep work in our quote upfront.
Old Flooring Removal and Disposal
Most quotes include old flooring removal as part of the job — but confirm this when comparing quotes. Carpet removal is typically $0.50-$1.00/sqft. Tile removal is more labor-intensive and can run $1.50-$3.00/sqft. Hardwood removal (if it's glued down) is also heavier work. We include removal and disposal in our standard quotes.
Furniture Moving
Some installers charge extra to move furniture; others include basic furniture moving. We include moving standard furniture as part of the job. We don't move major appliances (refrigerators, washing machines), pianos, or built-in units — those should be arranged separately before we arrive.
Baseboard and Trim Work
Every flooring installation requires quarter-round or baseboard shoe molding along the walls to cover expansion gaps. This is standard and included in our quotes. Full baseboard replacement (removing existing baseboards and installing new ones) is a separate cost if requested.
Condo Access Logistics
Condo installations have the same per-sqft pricing as house installations. The difference is scheduling — elevator booking, noise-restricted installation windows, and building permit requirements can extend project timelines. Downtown Toronto condo projects may also involve paid parking costs for our crew, which we factor in when quoting city-centre projects.
Sample Budget: 500 Sqft Main Floor Renovation
To make the numbers concrete, here’s a realistic cost breakdown for a 500 sqft main floor renovation — replacing existing carpet with luxury vinyl plank in a typical Brampton or Mississauga house:
| Line Item | Estimated Range |
|---|---|
| Carpet removal and disposal | $300–$600 |
| Subfloor inspection and minor leveling | $0–$400 (if needed) |
| LVP material and installation (500 sqft) | $1,500–$3,000 |
| Quarter-round trim and transition strips | $200–$400 |
| Total estimate | $2,000–$4,400 |
This is why a free in-home estimate matters. Every project is different — subfloor condition, room layout, distance from our base, and the specific product chosen all affect the final number. You can’t get an accurate quote over the phone or online. See our Toronto flooring installation page for what to expect from a typical project in the city.
Why Cheap Installation Costs You More Long-Term
This isn’t a warning about cut-rate contractors to scare you into choosing us — it’s a factual explanation of what happens when specific parts of a flooring installation are skipped or done poorly.
Skipped subfloor prep leads to squeaks, movement, and boards that loosen over time. A subfloor that isn’t adequately flat will show as visible waves in the finished floor. Soft spots or damaged areas will cause boards to flex, which eventually breaks the locking mechanism on floating floors.
Wrong expansion gaps lead to buckling. Hardwood and LVP expand with heat and humidity. If the floor is installed tight to the walls without the proper gap, it has nowhere to go in summer — boards push against each other and the floor lifts. This is one of the most common failure modes we get called in to fix.
Poorly planned transitions create visible seams between rooms, trip hazards at doorways, and gaps that collect debris. Proper transition planning is part of every professional quote — it shouldn’t be an afterthought.
When a floor fails prematurely because of installation shortcuts, the cost to fix it — pulling up the floor, fixing the subfloor, and reinstalling — is typically more than the original job would have cost from a quality contractor. We see this regularly.
What’s Included in a Pro Flooring Co Quote
We don’t itemize separately and then add costs at the end. Our quotes are all-in. Here’s what every Pro Flooring Co project includes:
- ✓Free in-home measurement and consultation
- ✓Flooring product recommendation with reasoning
- ✓Subfloor inspection and condition assessment
- ✓Old flooring removal and debris disposal
- ✓Subfloor leveling and minor prep (if needed — disclosed upfront)
- ✓Full installation including acclimatization time for hardwood
- ✓Quarter-round trim and all required transition strips
- ✓Final cleanup and debris removal
- ✓Walkthrough with the homeowner at completion
- ✓One-year workmanship guarantee on all labour
Request a free in-home estimate and we’ll assess your space, recommend the right product, and give you a firm all-in price with no surprises.
Common Questions
Laminate is the most affordable option at $2-$4/sqft installed. It works well for above-grade bedrooms and living areas but is not recommended for basements or moisture-prone rooms. LVP at $3-$6/sqft offers waterproofing and is a better long-term value in most situations.
It depends on how the contractor quotes. We quote all-in prices covering both materials and labour. Always ask for an all-in per-sqft price when getting quotes — this is the only way to make an accurate comparison.
Replacing carpet with hardwood typically costs $6-$12/sqft all-in. This includes carpet removal and disposal, any subfloor leveling, and hardwood supply and installation. The range depends on hardwood species and existing subfloor condition.
Condo installations have the same per-sqft pricing as houses. The difference is logistics — elevator booking, building permits, noise-restricted hours. These affect scheduling timelines but not usually the final price. We manage all condo logistics as part of the project.